
Alabaster Dome Wall Light – 35 cm Twin-Rod Sconce, Antique Brass | Akner
An alabaster dome wall light: a 35 cm half-dome of real, veined alabaster stone on a round backplate and twin turned rods in 304-grade stainless steel with an antique brass finish. 350 × 385 mm. G9 holder, max 40 W, bulb not included; fit a 3000K warm-white LED. IP20 indoor, not dimmable. Made for bedside walls, hallways and foyers.
Original price was: ₹25,830.00.₹12,960.00Current price is: ₹12,960.00.
Overview
The day is done. You switch off the big light and the alabaster dome wall light beside your bed takes over. A soft half-moon of stone glows on the wall. That is all the room needs now. That shape is why people call it a half moon wall light. For a carved stone piece with a built-in LED, see our stone wall light.
Akner is a 35 cm dome of real alabaster, cut as one half-round shade. It sits on a round backplate, with two turned rods hanging below it like a pair of beaded tassels. 350 mm wide, 385 mm tall. One G9 bulb inside, bulb not included.
Why does real alabaster glow like this?
Alabaster is stone formed beneath the earth. It belongs to the stone family, with marble and onyx, but it lets light through.
A craftsman in our Greater Noida factory reads each block before he cuts it. He decides where the veins should sit on the dome, then shapes and polishes the curve by hand. He leaves the natural markings alone.
Switch it on and the stone glows from inside. Soft honey veins show up that you barely saw by day. No two domes are the same, because no two blocks of stone are.
One block of stone. One light. Never repeated.
Where should you put an alabaster dome wall light?
Beside the bed. Mount it at 110–120 cm from floor to centre. The warm light falls forward and down onto your book, not into the eyes of the person next to you. It also frees your bedside table for a glass of water and nothing else.
In a hallway or foyer. Mount it at 150–160 cm. It lights faces and the art on the opposite wall, so the walk to your door feels finished.
On the way to the powder room, or on a feature wall. The pale veined stone holds its own against dark paint, marble or travertine. Keep it on a dry wall; it is an indoor IP20 light.
In a study or reading corner. A pair either side of a console or bookshelf gives even light across the surface.
Near a home mandir. A calm, warm stone glow suits a pooja corner too.
It looks its best in pairs. In a room of at least 9 sq m with a 2.5 m ceiling, leave 10 cm clear each side of the backplate. It sits well with linen, terracotta, sage green, raw wood, warm-white plaster, marble and travertine. We would not pair it with matte-black industrial fittings or cool-blue LED downlights.
Light, fitting and the steel behind the stone
The backplate and the twin turned rods are 304-grade stainless steel with an antique brass finish. It will not rust. You get a lifetime warranty against rusting on orders from 4 October 2026.
Inside is one G9 holder, max 40 W. The bulb is not included; fit a 3–4 W warm-white G9 LED at 3000K. It lights the stone evenly with no bare-bulb hotspot, and keeps the alabaster cool.
Because the shade is stone, not fabric, it handles close-range heat well and its colour does not shift over time. The light is not dimmable. It runs on 220–240 V and is rated IP20 for dry indoor walls.
It is hardwired to a standard wall back-box. Any licensed electrician fits it in 20–30 minutes, and we give free video-call support while they do.
Why buy it from the people who make it
We make this light in our own Greater Noida factory, and have since 2015. In-stock pieces leave within 4 working days. Out-of-stock pieces are made to order in 12–15 working days. A custom size or finish takes 15–20 days. Importers take 60–120 days.
Shipping is free across India. Pay by UPI, card, net banking or EMI on eligible cards. If anything arrives damaged, tell us within 24 hours of delivery with photos and we sort it.
The stainless steel will not rust, with a lifetime warranty on orders from 4 October 2026. We keep spares for 10+ years. Designers and architects get overnight project support; send us your drawing for a quote. For your own home, buy it right here on this page.
See more wall lights, our indoor wall lights, bedroom wall lights and hallway wall lights, the full alabaster lighting collection, and warm stone pieces for pooja room lighting. Planning the whole bedroom? Read 7 bedroom wall light ideas.
Pairs well with: the 35 cm carved alabaster up and down wall light — same stone, same warm 3000K glow, for a shorter wall or a second room. Or the twin-column stacked alabaster wall light, 20 in tall, for a bedside pair.
Pairs well with: the Alabaster Torch Wall Light, a 50 cm torch-shaped piece in the same antique brass finish for a fireplace or mirror wall.
Specifications
Fit
Vastu
Vastu guides prefer soft, warm, indirect light in the bedroom over a harsh light above the bed. A wall light to the side of the bed, in warm white, is what they suggest. Akner’s 3000K glow through stone fits that.
For entrances and hallways, the tradition asks for a well-lit, welcoming approach with no dark corners. East and west walls are often named as good places for wall fixtures, with the north-east kept softly lit. Natural stone links to the earth element, which Vastu sees as grounding.
Vastu is a tradition of arranging a home so it feels right. We don’t promise luck. We make a light that helps your room feel calm.
Care
FAQ
What size is this alabaster dome wall light?
It is 350 mm wide and 385 mm tall (35 × 38.5 cm). The dome is 35 cm across, so it suits a bedside wall, a hallway or a foyer.
What bulb does it use, and is the bulb included?
It uses one G9 bulb, up to 40 W, and the bulb is not included. Fit a 3–4 W warm-white G9 LED at 3000K; it lights the stone evenly and keeps it cool.
Is it dimmable?
No. This light is not dimmable. It gives a fixed warm 3000K light.
Is the alabaster real, and will the metal rust?
Yes, the dome is real alabaster stone, shaped and polished by hand, so its veins differ on every piece. The backplate and rods are 304-grade stainless steel with an antique brass finish, with a lifetime warranty against rusting on orders from 4 October 2026.
At what height should I mount it, and can I use it in a bathroom?
Mount it 110–120 cm from floor to centre beside a bed, or 150–160 cm in a hallway or foyer. Keep it out of the bathroom: it is rated IP20, for dry indoor walls only.
Will the stone crack or yellow, and how do I clean it?
Natural alabaster does not yellow or discolour from the heat of a low-wattage LED. Avoid knocks, and clean it with a dry or barely damp soft cloth.
How is it installed, and how soon will it arrive?
Any licensed electrician can fit it to a wall back-box in 20–30 minutes, with free video-call support from us. In-stock pieces dispatch within 4 working days, made-to-order pieces in 12–15 working days, and custom sizes or finishes in 15–20 days.
Should I buy one or a pair, and can I get spares later?
A pair is the stronger choice for a bedhead wall or either side of a mirror or doorway; one works over a console or in a foyer. We keep spare parts for 10+ years.
See Jagmag pieces in real spaces
Selected installations from our chandelier and hospitality projects. Tap a card to play.
Bulk & project orders
For dealership, hospitality and project orders, our team shares custom pricing, lead times and on-site coordination the same day.
What buyers say
5.0 · 1 review- April 4, 2024
Looks simple after installation and suits the area we chose. 🙂 on the bedroom wall.















