
Crystal Bell Pendant Light – 3-Light Cluster, Cut Borosilicate Glass and Coloured Crystal Beads
This crystal bell pendant light is a 3-light cluster of clear borosilicate glass bells, hand-cut in a diamond lattice, under strands of red, blue and clear crystal beads. The round canopy and fittings are 304-grade stainless steel in a satin gold finish. 900 mm tall, 284 mm spread, three E14 holders (bulbs not included). Made in our own factory in Greater Noida, India.
Original price was: ₹17,580.00.₹11,210.00Current price is: ₹11,210.00.
Overview
Three bells of light, hung at three heights over your table. This bell cut light is our crystal bell pendant light: three clear borosilicate glass bells, each cut by hand in a diamond lattice, under strands of red, blue and clear crystal beads.
It is a 3-light cluster on one round satin gold canopy, 200 mm wide. The cluster is 900 mm tall and spreads 284 mm. Each bell is 120 mm across. The drops are staggered, so the three bells fall like a small cascade, not a straight row.
Cut borosilicate glass and crystal beads
Glass starts as earth: silica sand, boric oxide, soda ash and alumina, melted together. We use clear borosilicate glass for its clarity and purity. Nothing is added to colour it.
Then come the hands. Our craftsman cuts each bell with deep vertical flutes and a diamond lattice around the lower half. It is slow work, one line at a time, and no two bells come out exactly alike. Above each bell, a strand of crystal beads is threaded on a satin gold stem: a clear faceted rondelle, a red bicone, a clear faceted round, then a blue bicone.
Switch it on and the cuts catch the bulb. Dozens of small lit edges show across the glass, and soft sparkle falls on the ceiling and walls. The red and blue beads pick up the glow, so colour sits at eye level even when the light is off.
Where a crystal bell pendant light works best
Over a dining table. One cluster suits a 4–6 seater round or square table. Hang the lowest bell 75–85 cm above the table top. For a 6–8 seater table over 180 cm long, hang two clusters 60–70 cm apart.
In an entrance foyer. With a ceiling of 9 ft or more, the three heights fill the vertical space. The cluster reads as a statement even against a plain wall.
In a hotel or boutique reception. The cut bells and bead strands hold up at scale. One cluster works, or a row of three over a long desk.
In the living room or bedroom. One cluster brings warmth and texture to a seating corner, a reading corner or a dressing area. It works on an 8 ft ceiling when the wire is shortened.
The satin gold sits between antique brass and polished gold, warm without being heavy. It pairs with natural wood, dark walnut, white walls and warm grey rooms, warm-toned textiles, cane furniture and brass hardware. Keep it away from cool chrome fixtures, stark white cabinetry and industrial grey palettes. Browse more glass pendant lights, dining room pendant lights, living room pendant lights, bedroom pendant lights or all our pendant lights. Planning the height? Read how to choose pendant lights for the dining room.
Light, fitting and finish
The round canopy, the bead stems and the holder cups are 304-grade stainless steel with a satin gold finish. Steel like this does not rust, and it comes with a lifetime warranty against rusting on orders from 4 October 2026.
The canopy is 200 mm wide and 25 mm deep. Each bell hangs on a clear wire. As drawn, the cluster is 900 mm tall, with each pendant body 450 mm long. Your electrician shortens the wires at installation. On an 8 ft ceiling, bring the overall height down to about 600 mm.
Each bell takes one E14 candle bulb, three in all. The bulbs are not included. Fit 3000K warm-white LEDs: they suit the cut bells and bring out the colour of the beads. This light is not dimmable. It is IP20, made for dry indoor rooms only, so keep it away from rain, moisture and high humidity, including covered outdoor areas. It runs on 220–240 V.
Why buy your crystal bell pendant light from us
We make this cluster in our own factory in Greater Noida, as we have since 2015. Not imported. Not traded.
In stock, it leaves us within 4 working days. Out of stock, we make it to order in 12–15 working days. A custom size, finish or colour takes 15–20 days. Importers take 60–120.
Shipping is free across India. Pay by UPI, card, net banking or EMI on eligible cards. If anything arrives damaged, tell us within 24 hours of delivery, with photos, and we sort it.
The stainless steel will not rust, with a lifetime warranty on orders from 4 October 2026. We keep spares for 10+ years, so a replacement bell or bead is still there later. Designers and architects get overnight project support. Need several for a project? Request a quote. For your own home, buy it on this page.
Pairs well with: our bell pendant light, a single 25 cm bell of amber borosilicate glass, for the kitchen island or the next room.
Specifications
Fit
| Specification | Detail |
|---|---|
| Overall height | 900 mm as drawn (shortened at installation) |
| Cluster spread | 284 mm |
| Pendant body | 450 mm each, staggered drops |
| Glass shade | Ø 120 mm bell |
| Ceiling canopy | Ø 200 mm × 25 mm; fixing points 82 mm × 122 mm as drawn |
| Shades | Clear borosilicate glass, hand-cut vertical flutes and diamond lattice |
| Beads | Crystal beads: red bicone, blue bicone, clear faceted round and rondelle |
| Metal parts | 304-grade stainless steel, satin gold finish (canopy, bead stems, holder cups) |
| Other finishes | Other finishes on request; custom bead colours on orders of 10 or more |
| Rust warranty | Lifetime, on all 304-grade stainless steel parts (orders from 4 Oct 2026; see Legal Policies 4.1A) |
| Suspension | Clear wire, shortened at installation |
| Number of lights | 3 |
| Light source | E14 holder × 3; bulbs not included; fit 3000K warm-white LEDs |
| Max wattage and lumens | Ask us for this detail |
| Colour temperature | 3000K warm white (with the recommended bulbs) |
| Voltage | 220–240 V |
| Dimmable | No |
| IP rating | IP20 (indoor) |
| Mounting | Ceiling-mounted, round canopy, adjustable wire |
| Ceiling and room | 9 ft ceiling recommended, 8 ft minimum with wire shortened; room 10 × 10 ft or more; 60 cm wall clearance on all sides |
| Rooms | Dining room, foyer, living room, bedroom, hotel reception |
| Style | Traditional, cut-glass crystal |
| Dispatch | In stock: within 4 working days. Out of stock: made to order in 12–15 working days |
| Custom size, finish or colour | 15–20 days |
| Certifications | CE, UL and ZED |
| In the box | Canopy with three pendants, bead strands and clear borosilicate glass bells; bulbs not included |
| Made in | Our own factory in Greater Noida, India |
Vastu
Indian Vastu guides place the dining area in the west or north-west of the home, and avoid the south-west. They favour warm, welcoming light over the table, an entrance that is bright in the evening, and no dark corners or flicker.
Hang this cluster centred over the dining table or in the middle of the foyer. Three 3000K warm-white bulbs give an even, warm glow, and the cut borosilicate glass spreads it gently instead of throwing glare. In the bedroom, keep it to a corner or beside the bed, not straight above where you sleep.
We don’t promise luck. Vastu is a tradition of arranging a home so it feels right, and warm, even light is part of that.
Care
FAQ
Is this cluster the right size for my room?
Yes, for a 4–6 seater table, a foyer or a room of 10 × 10 ft or more. It is 900 mm tall and spreads 284 mm. On an 8 ft ceiling, the wires are shortened to bring it down to about 600 mm, and it still looks in proportion.
Which bulbs does it take, and are they included?
It takes three E14 candle bulbs, and they are not included. Fit 3000K warm-white LEDs; they bring out the cuts in the glass and the colour of the beads.
Is it dimmable?
No. This light is not dimmable. It gives a fixed warm 3000K light.
Is the glass real, and will the metal rust?
Yes, the bells are real clear borosilicate glass, cut by hand. The canopy and fittings are 304-grade stainless steel, with a lifetime warranty against rusting on orders from 4 October 2026.
Can I get other bead colours?
Yes, on orders of 10 or more units. The standard cluster ships in the red, blue and clear beads shown; a custom colour or finish takes 15–20 days.
Who installs it, and how soon will it arrive?
Any licensed electrician fits it in 20–30 minutes, and we offer free video-call support. In stock, it is dispatched within 4 working days; made to order takes 12–15 working days.
See Jagmag pieces in real spaces
Selected installations from our chandelier and hospitality projects. Tap a card to play.
Bulk & project orders
For dealership, hospitality and project orders, our team shares custom pricing, lead times and on-site coordination the same day.















