Picture this. It’s 7 pm at Purvanchal Royal City, Greater Noida. You walk into the clubhouse with your guests — and every single one of them stops and looks up.
That was the brief. One light that makes people stop.
This is the story of a clubhouse chandelier Noida residents now see every evening — an 18-foot crystal showpiece we designed, built and installed ourselves.
Quick answer: The Purvanchal Royal City clubhouse chandelier Noida project is an 18-foot custom crystal installation by JagMag Lights — a gold circular canopy in the ceiling, a tall cylindrical curtain of crystal strands falling through the double-height lobby, and a cone-shaped crystal cascade at the bottom. Designed and manufactured 100% in India, in 15–20 working days.
What’s in this story
- What makes this project special
- Project at a glance
- Real photos from the clubhouse
- How we built it
- How big should a clubhouse chandelier be?
- Why Made in India was the smart choice
- Which chandelier should you buy?
- Questions people ask us
What makes this clubhouse chandelier Noida project special?
Most clubhouse lights are an afterthought. A few downlights, maybe a fancy pendant. Done.
Purvanchal Royal City wanted the opposite. The lobby is double-height — two full floors of open air in the middle. Empty vertical space like that either feels grand or feels hollow.
Here’s the thing. Only one kind of light can fill it: a tall, vertical chandelier.
So we designed one piece with three parts:
- The canopy. A broad gold-finish circular base, sitting inside the round ceiling cove like a crown. Warm LED lamps glow from inside it.
- The curtain. Hundreds of fine strands of K9 crystal octagons drop straight down from the canopy — a shimmering cylinder of light falling past the first-floor balcony.
- The cone. Near the bottom, the strands flare out into a cone of graduated crystal rings. It catches the light like a bell of frozen rain.
And one detail most visitors never notice: the black marble circles on the lobby floor sit exactly under the chandelier. The floor echoes the light. That’s not luck — that’s coordination with the architect.
Project at a glance
| Project | Purvanchal Royal City, Greater Noida |
| Space | Double-height clubhouse lobby |
| Fixture | One custom crystal chandelier, approx. 18 ft tall |
| Form | Gold circular canopy + cylindrical crystal curtain + conical crystal cascade |
| Material | K9 crystal octagon strands on a steel frame, warm LED lamps |
| Made in | India — designed, manufactured and installed in-house by JagMag Lights |
Real photos from the Purvanchal clubhouse
No renders here. These are real photos from the site — including one with our scaffolding still up, because we install our own work.
How we built it: from sketch to sparkle
A piece this size doesn’t come out of a catalogue. Here’s the actual process:
- Measure the void. We surveyed the lobby — ceiling cove diameter, floor-to-ceiling height, balcony lines — so the chandelier would relate to both floors.
- Design the form. Canopy, curtain, cone. Drawings went back and forth with the project team until the proportions felt right.
- Fabricate the frame. The steel canopy ring and internal frames were made in our own factory in Greater Noida — the project site is practically our neighbour.
- String the crystal. Hundreds of strands, each cut to length, each octagon checked. This is the slow, patient part.
- Install and light it. Our own technicians hung the frame, dressed the strands on site, and tuned the warm LED glow.
Total custom manufacturing time? 15–20 working days. An importer would quote you 60–120 days for the same piece — if they could make it at all.
How big should a clubhouse chandelier be?
Now you might be thinking: my society’s clubhouse is smaller. How do I get the size right?
Use these three simple rules:
- Diameter: add the room’s length and width in feet. That number, in inches, is your starting diameter. A 20 × 20 ft lobby → about 40 inches. For a double-height space, go 10–20% bigger.
- Height: multiply ceiling height in feet by 2.5–3. That’s the fixture height in inches. An 18–20 ft ceiling comfortably carries a tall vertical piece like this one.
- Clearance: keep the lowest crystal at least 8 ft above the floor, and don’t let it drop below the first-floor balcony line in a two-storey space.
Want the full method? Read our chandelier size guide, or this clear foyer lighting guide from Capitol Lighting. For commercial spaces, LEDVANCE’s lobby lighting guide explains layering the light around a statement piece.
Why a Made-in-India chandelier was the smart choice
Let me explain why a builder like Purvanchal picks a manufacturer over an importer.
| JagMag (Indian manufacturer) | Typical importer/stockist | |
|---|---|---|
| Custom lead time | 15–20 working days | 60–120 days |
| Spare crystals later | Available 10+ years — we made it, we can remake it | Usually gone once stock sells out |
| Service issue at site | Our own technicians, often resolved overnight | Wait for overseas support |
| Repeat order for Phase 2 | Exact same piece, any time | Design may be discontinued |
JagMag Lights is a DPIIT-recognised, government-funded Make-in-India lighting manufacturer based in Greater Noida. For this project, the factory and the site were in the same city. That’s why the install was smooth — and why the society will get spares and service for decades.
This is also our second big custom project in the area — see the SKA Orion custom chandelier in Noida and the SKA Destiny double-height LED chandelier.
Which chandelier should you buy for your clubhouse?
Building or upgrading a clubhouse, hotel or grand foyer? Start here:
- For a double-height void: the Glass Feather Cascade — a 150 cm hand-blown glass drop made for high ceilings.
- For a stairwell or tall shaft: the Talar 300 cm Murano glass column with dimmable LED.
- For lounges and card rooms: the Wave chandelier with 69 cascading glass leaves.
And if nothing off the shelf fits your space — that’s exactly when you should customise a chandelier. It’s what we do best. Our banquet hall and hotel lobby guide walks you through the planning.
Questions people ask us
How tall is the Purvanchal Royal City chandelier?
About 18 feet — a cylindrical crystal curtain dropping through the double-height lobby, ending in a conical cascade.
What is a clubhouse chandelier Noida project like this made of?
K9 crystal octagon strands on a steel frame, with a gold-finish canopy and warm LED lamps. K9 is hard optical crystal glass — it sparkles like cut glass but is tough and affordable.
How much does a custom clubhouse chandelier cost in India?
It depends on size, crystal quantity and design complexity. Because JagMag manufactures in-house in India, you skip import margins — and custom pieces ship in 15–20 working days. Contact us for a quote.
How is a chandelier this big cleaned and maintained?
The strands are dressed so sections can be accessed for cleaning, and we supply spare crystals and parts for 10+ years. Our own service team handles site visits.
Can the same design be repeated for Phase 2 of a project?
Yes. We’re the manufacturer, so we can make the exact same piece again any time — ideal for phased townships and builders.
So here’s our question for you: when guests walk into your clubhouse, what do they look up at?